Stryker 12 Fluoroscopy Trac...

Product details

Short Description:

Stryker 12-inch fluoroscopy tracker kit used with Stryker surgical navigation systems and compatible C-arm imaging platforms. The system includes the tracker assembly, phantom calibration plate, 10-meter interface cable, original transport case, user manual, safety warning sheet, and Wiha SoftFinish hex driver tool. The tracker was briefly powered using a test CR2 battery and the indicator light illuminated as expected, confirming basic power functionality. The system remains in excellent cosmetic condition.

Tracker Unit
Reference Number (REF): 6004-008-005
Serial Number: 10020
Date of Manufacture (DOM): 10/2008

Phantom Calibration Plate
Part Number: 12P004-054
Date of Manufacture (DOM): 09/2008

Interface Cable
Reference Number (REF): 6004-310-000
Cable Length: 10 m

Battery Requirement: CR2 3V Lithium Battery
Regulatory Marks: CE, CSA

Condition Summary:

Tracker Assembly
• Aluminum tracker frame in excellent condition
• No structural damage or deformation observed
• Minor cosmetic scuffs consistent with normal handling

Optical Dome / Sensor Area
• Optical diffuser dome intact
• Sensor grid visible and clean
• No cracks or clouding observed

Phantom Calibration Plate
• Phantom plate present and well preserved
• Adjustment knobs intact and functional
• Surface clean with minor cosmetic signs of use

Battery Compartment
• Battery compartment clean
• Spring contacts intact
• No corrosion observed

Transport Case
• Original rigid wooden transport case included
• Aluminum reinforced edges and corners
• Custom foam interior present and intact
• Case shows light storage wear but remains protective

Functionality / Testing Summary:

Power Test
• CR2 battery temporarily installed for testing
• Activation button pressed
• Status indicator illuminated for approximately 3 seconds

Operational Status
• Indicator response confirms unit powers on
• No pairing performed with navigation console
• No additional calibration or system testing conducted

What Is Included:

Stryker Fluoroscopy Tracker Kit (REF 6004-512-000) includes : 

• Fluoroscopy Tracker (REF 6004-008-005, SN 10020)
• Phantom Calibration Plate (12P004-054)
• Interface Cable (REF 6004-310-000, 10 m)
• Original Hard Transport Case with Foam Interior
• Stryker User Manual
• Safety Warning Label Sheet
• Wiha SoftFinish Hex Driver Tool

What Is Not Included:

• CR2 3V Lithium Battery
• Navigation workstation or console
• Any accessories not shown in the images

Buyer Advisory Note:
This device is intended for integration with compatible Stryker navigation systems and fluoroscopy imaging platforms. Buyers should confirm compatibility with their navigation system and C-arm configuration prior to purchase.

Shipping Note:
The system will be securely packed and shipped inside its original transport case with additional outer packaging to ensure safe delivery.

*Items shown in photos are the items that will ship.  If it is not shown in the photos, it is not included*

Stock ID : 39160 {P.O 2022} (WH104 C5)

Comments:

Kindly enlarge the images and see them with zooming.

Concern or query: Ask a Question

1. 1.    Overall Condition:- As seen in images  - Very Good
2. 2.    Physical Condition:  Please review images before bidding : Very Good
3. 3.    Working Condition: Has been tested at our end & is in good functionality...will receive item as pictured ……………(offered AS IS)
4. 4.    “As a whole; the item has not been tested technically or professionally at our end- unable to test --- being sold STRICTLY AS IS! Biomed check is strongly recommended before clinical use!”
5. 5.    Completeness: (with everything seen in the pictures. Please look at all pictures and go through detail description before bidding.)