Product details

Stryker Bone Mill 5400-700-000 w/ 5400-704-000 Cable & Sterilization Container – Tested

Item Overview

Pre-owned Stryker Bone Mill REF 5400-700-000 with Bone Mill Cable REF 5400-704-000 and Sterilization Container REF 5400-705-000. Five comparable sets available; sale is for ONE set.

Each Bone Mill was individually tested on a compatible Stryker CORE console. The console recognized the connected instrument as “THE MILL,” the Bone Mill controls responded during testing, and unloaded rotation was smooth with no abnormal vibration or binding observed.

Stryker CORE console shown in photos was used for testing/demonstration purposes only and is NOT included.

Device Information

• Manufacturer: Stryker
  
• Product: Bone Mill / “The Mill”
  
• Bone Mill REF: 5400-700-000
  
• Bone Mill Cable REF: 5400-704-000
  
• Cable Length: Approx. 12 ft
  
• Sterilization Container REF: 5400-705-000
  
• CE: 0197
  
• Made In: USA
  
• Quantity Available: 5 sets
  
• Sale Quantity: ONE set
  

Available Serial Numbers – Comparable Condition

• Set 1: Mill S/N 172-890-9383 • Cable S/N 16211
  
• Set 2: Mill S/N 120-380-7793 • Cable S/N 15180
  
• Set 3: Mill S/N 151-110-3433 • Cable S/N 16239
  
• Set 4: Mill S/N 132-630-2343 • Cable S/N 16004
  
• Set 5: Mill S/N 132-630-2263 • Cable S/N 14217
  

Serial number supplied may vary depending on available inventory.

Manufacturer Notes

The Stryker Bone Mill is designed for preparation of autologous bone using a single-pass cutting action. Compatible blades include:

• Fine Blade REF 5400-702-000 – up to 3.2 mm
  
• Medium Blade REF 5400-701-000 – up to 5.0 mm
  
• Coarse Blade REF 5400-703-000 – up to 8.0 mm
  

Compatible with the Stryker Mill Instrument Driver REF 5400-750-000 or compatible Stryker CORE / CORE 2 system equipment.

Mill Instrument Driver, CORE/CORE 2 console, and blades are NOT included.

Functional Testing

Each of the five available sets was individually connected and checked using a compatible Stryker CORE console.

• Console recognized the connected instrument as “THE MILL”
  
• Operating/settings interface was accessible on the console
  
• Bone Mill controls responded during testing
  
• Drive mechanism activated and rotated
  
• Unloaded rotation was smooth and consistent
  
• No abnormal vibration or binding observed
  
• Corresponding Bone Mill cable maintained communication during testing
  
• All five sets were individually checked with comparable results
  

Testing Limitations

Not tested: Foot-control operation • Blade cutting • Loaded milling operation • Clinical use

A compatible foot control was not available during testing. No blade, bone, cutting media, patient, or clinical testing was performed.

Condition Summary

Bone Mill – REF 5400-700-000

• Great overall used cosmetic condition
  
• Housing and structural components intact
  
• No major cracks or structural damage observed
  
• Normal scratches/scuffs consistent with previous use
  
• Controls intact
  
• Smooth unloaded rotation during testing
  
• No abnormal vibration or binding observed
  

Bone Mill Cable – REF 5400-704-000

• Approx. 12 ft long
  
• Good overall used condition
  
• No major cuts or tears noted
  
• Connectors and strain reliefs intact
  
• Maintained communication between the Bone Mill and test console during testing
  

Sterilization Container – REF 5400-705-000

• Perforated metal construction
  
• Base and lid included
  
• Lid locking clamps/latches intact
  
• Carrying handles intact
  
• No major structural damage observed
  
• Normal cosmetic wear consistent with previous use
  

Included – ONE Set

• 1× Stryker Bone Mill – REF 5400-700-000
  
• 1× Stryker Bone Mill Cable – REF 5400-704-000
  
• 1× Stryker Sterilization Container – REF 5400-705-000

Not Included

Stryker Mill Instrument Driver REF 5400-750-000 • Stryker CORE / CORE 2 console • Foot control • Fine/Medium/Coarse blades • Milling accessories/consumables • Additional cables • Other surgical instruments • User manual • PM/service documentation • Any other accessories not specifically pictured or listed

CORE console shown in the testing photos is NOT included.

Buyer Advisory

Pre-owned reusable surgical equipment. Each available set was individually tested for console recognition, Bone Mill cable communication, control response, and unloaded mechanical rotation. Foot-control operation, blade cutting, loaded milling, and clinical operation were not tested.

Buyer is responsible for confirming compatibility and performing appropriate inspection, cleaning, sterilization, servicing, and complete functional verification according to manufacturer and facility requirements before use.

Five comparable sets are available; sale is for ONE Bone Mill, ONE corresponding Bone Mill Cable, and ONE Sterilization Container only.

Stock ID: 40122 (P.O. 2026) (OFH C3)

Purchase Terms & Buyer Protections

Condition & Use Notice

Condition: Overall, cosmetic, and functional condition are described in the listing above; please review all images carefully.
Functionality: Sold as described in the listing, or untested if stated. Biomed evaluation is recommended where applicable.
Included: Only items shown in photographs or specifically stated in the listing are included.
Buyer Responsibility: Buyer is responsible for verifying compatibility, suitability, and obtaining inspection, calibration, maintenance, or service as appropriate prior to use.