Smiths Medical 3500 Medical...
Smiths Medical 3500 Medical Pump (For Parts/Repair) ~ 37649
Item specifics
- For parts or not working
- Model
- 3500
MPN- 3500
Product details
Manufacturer | Smiths Medical ASD, Inc. |
Item: | Smiths Medical Medfusion 3500 Syringe Infusion Pump (For Parts/Repair) |
Model/Cat # | Medfusion 3500 |
Serial No. | M46670 |
Made In: | USA |
Date of Manufacture: | U/K |
Voltage: 100–240V~, 50/60Hz, 30VA
Short description:
Smiths Medical Medfusion 3500 Syringe Pump with PharmGuard V4.1.5 software. Powers on, completes self-test, but shows "Set Time and Date" advisory—RTC and backup batteries need replacement. LCD and controls intact. No accessories included. Sold as-is for parts or repair.
- Power Supply Output: 6–14 VDC, 7 Watts
- CE Mark Present: Yes
- IR/RS232 Communication Ports: Yes
Warnings & Cautions Extracted:
ECMO Use Warning:
“Do not use on the inlet side of Extracorporeal Membrane Oxygenation (ECMO) systems where the negative pressure is greater than -100 mm Hg as the high negative pressures can result in uncontrolled fluid flow.”MRI Use Caution:
“May be used in static magnetic fields up to 150 Gauss when secured to non-movable object. Tested using 1.5 Tesla 64 MHz shielded MRI system.”General Caution:
“Risk of fire or explosion if used with flammable anesthetics or oxygen-enriched atmospheres.”
Configuration & Software Information:
- Software Version: PharmGuard™ Medication Safety V4.1.5
- Config Version: CRC 9091
- Startup Screen Messages: “Performing Self-Test”, followed by “System Advisory: Set Time and Date”
Condition & Functionality Summary:
- Device powers on and initializes successfully, performing self-test and displaying configuration verification.
- Proceeds to system advisory warning: “Set Time and Date”, indicating internal clock battery is dead and needs replacement.
- Backup battery is depleted/dead and does not support operation without AC power.
- LCD screen is bright, no major pixel issues observed.
- Soft keys and controls are intact, but functionality could not be further validated due to the system advisory message.
- Device would require biomed servicing, particularly RTC battery replacement and battery pack installation, prior to full operational use.
- Cosmetic Condition: Some scuffs and signs of prior use. No major cracks or damage.
- Accessories: No pole clamp, syringe, manual, or additional accessories included.
NO RETURN, REFUND OR EXCHANGE OPTION FOR PRODUCTS LISTED UNDER "PARTS OR NOT WORKING" CATEGORY
Package includes:-
Smiths Medical Medfusion 3500 Syringe Infusion Pump (For Parts/Repair)
*Items shown in photos are the items that will ship. If it is not shown in the photos, it is not included*
Sterilized : Non-sterile device
Manual : Not Included
Cleaned : Yes, at our facility
Shipping Weight : 10 lbs
Stock ID : 37649 (P.O 2017) (WH 05E)
Comments:
Kindly enlarge the images and see them with zooming.
Concern or query: Ask a Question
Condition: Parts Only, please refer to images for cosmetic condition.
- 1. Overall Condition: As seen in images - Parts Only
- 2. Physical Condition: Please review images before bidding - Good
- 3. Working Condition: Parts Only.....Will receive item as pictured ……………(offered AS IS)
- 4. “As a whole; the item has not been tested technically or professionally at our end- unable to test --- being sold STRICTLY AS IS! Biomed check is strongly recommended before clinical use!”
- 5. Completeness: (with everything seen in the pictures. Please look at all pictures and go through detail description before bidding.)