2015 Philips IntelliVue MX8...
2015 Philips IntelliVue MX800 Monitor w/ X2, M3012A, Module Rack & Leads ~ 40234
Item specifics
Product details
Philips IntelliVue MX800 Patient Monitor w X2, M3012A & M8040A Module Rack
Item Overview
Pre-owned Philips IntelliVue MX800 patient monitoring system configured with an IntelliVue X2 (M3002A), M3012A Hemodynamic Module with Cardiac Output capability, M8040A Universal Module Rack, rack interface cable, and patient monitoring accessories.
The system powers on and communicates normally. ECG/Respiration, NIBP, Nellcor SpO₂, and Temperature were tested and responsive. IBP and Cardiac Output capabilities were not independently tested.
Device Information
Philips IntelliVue MX800
- REF: 865240
- S/N: DE50840034
- DOM: 2015-03
- SW Rev: K.21.42
- Options: H10 • A08 • C06 • C09
- Made in Germany
Philips IntelliVue X2 / M3002A
- REF: 865039
- S/N: DE575N5967
- DOM: 2016-09
- SW Rev: L.01.09
- Options: C00 • C01 • C13 • C15 • C20
- Parameters: ECG/Resp • NIBP • Nellcor SpO₂ • Temperature
- Installed battery
Philips M3012A Hemodynamic Module
- REF: 862111
- S/N: DE83734744
- DOM: 2010-05
- Option: C05
- IBP • Temperature • Cardiac Output capability
Philips M8040A Universal Module Rack
- Option: A03
- Lot: 1621
- Made in Germany
- Pole clamp attached
Rack Interface Cable: REF 453563474781 • Model M3081-61626
Testing & Condition
- System Communication — MX800, X2, and M3012A communicate normally
- ECG/Respiration — Tested and responsive
- NIBP — Tested and responsive
- Nellcor SpO₂ — Tested and responsive
- Temperature — Tested and responsive
- IBP — Available through M3012A; not independently tested
- Cardiac Output — Capability present; not independently tested
- Touchscreen & Navigation — Responsive during testing
- MX800 Display — Bright and functional; visible surface scratches present; review images
- MX800 Housing — Good overall condition with normal prior-use wear
- Rear Blue Cable Cover — Present
- Ports & Connectors — Appear intact
- Remote Holder — Attached; remote not included
- X2 Monitor — Powers on and communicates normally; LCD has two visible digital lines, which did not affect observed functionality or touchscreen response during testing
- X2 Housing & Handle — Intact with normal cosmetic wear
- X2 Battery — Held charge during testing; actual health/runtime unknown
- M3012A Module — Good cosmetic condition
- M8040A Rack — Normal scratches/scuffs from prior use
Included
1× Philips IntelliVue MX800 Monitor
1× Philips IntelliVue X2 (M3002A)
1× Philips M3012A Hemodynamic Module
1× Philips M8040A Universal Module Rack with Pole Clamp
1× Rack Interface Cable — REF 453563474781 / M3081-61626
1× Power Cord
1× ECG Cable with 5-Lead Patient Leads
1× NIBP Hose with Reusable Adult Cuff
1× Direct Reusable Nellcor-Compatible SpO₂ Sensor
1× Skin Temperature Probe
1× IBP Adapter Cable — transducer not included
Patient accessories are compatible non-OEM accessories unless specifically identified otherwise.
Not Included
IBP transducer • Cardiac Output cable/transducers/accessories • Remote control • Rolling cart/stand • User manual • Additional modules • Disposable sensors • Any accessories not shown or specifically listed above.
Buyer Advisory
Pre-owned medical equipment. Testing was limited to the functions described above and does not constitute a complete biomedical inspection, calibration, or preventive maintenance. IBP and Cardiac Output were not independently tested. The X2 LCD has two visible digital lines and the MX800 display has visible surface scratches; please review images carefully. Battery held charge during testing, but actual capacity/runtime is unknown. Buyer should inspect and validate the system before clinical use.