Pre-owned GE CARESCAPE B650 critical care patient monitor with Patient Data Module (PDM), integrated thermal printer, dual expansion bay with (2) GE dummy modules, and a complete set of NEW CE-marked compatible reusable accessories.

The monitor powers on normally, boots into CARESCAPE software, and passes all functional tests listed below. Configured for Adult monitoring; Pediatric profiles are available through the system menus.

The bright color touchscreen LCD is fully responsive with only light superficial scratches visible under certain lighting conditions. The housing is clean with normal clinical wear and no major cracks or structural damage observed.

The installed rechargeable battery powers the unit during testing. Overall long-term battery health is unknown. We recommend charging the battery overnight before first use.

The PDM communicates properly with the monitor and all tested parameters function normally. The internal PDM battery is not installed, and the rear cosmetic rubber battery cover is missing. This does not affect operation while the module is installed in the monitor during testing.

Sale includes the monitor, PDM, (2) dummy expansion modules, hospital-grade power cord, and the NEW compatible accessories listed below.

Manufacturer: GE Healthcare Finland Oy

Item: GE CARESCAPE B650 Critical Care Patient Monitor

Model: B650-01

Serial #: SEW15090478HA

Date of Manufacture: February 2015

Country of Manufacture: Finland

CE Mark: 0537

Display: Color Touchscreen LCD

Power: 100–240 VAC • 50/60 Hz • 140 VA

Host Version: 2

Host Build: 2.0.7.49_39

Software Package: 6ICU

Manufacturer: GE Healthcare

Battery Date: January 2015

• Installed battery holds a charge during testing.
  
• Overall long-term battery capacity is unknown.
  
• We recommend charging the battery overnight before first use.
  

• Very good cosmetic condition
  
• Bright, responsive color touchscreen LCD
  
• Light superficial scratches on LCD, visible under certain lighting conditions
  
• No major cracks or structural damage observed
  
• Housing, buttons, rotary control, and handle in very good condition
  
• Integrated thermal printer installed and functioning
  
• Battery installed; powers the unit during testing
  

REF: 2016793-002R

Serial #: SA308429397GR

Features

• DINAMAP Compatible
  
• EK-Pro Arrhythmia Analysis
  
• 12SL Compatible
  
• Nellcor OxiMax SpO₂
  

Condition

• Good cosmetic condition with normal clinical wear
  
• Connector interface clean
  
• No dents or structural cracks observed
  
• Internal battery not installed
  
• Rear cosmetic rubber battery cover missing
  
• Latches operate properly
  
• Fully functional during testing
  

Type: M1024982

Quantity: 2

• Excellent cosmetic condition
  
• Installed in both expansion bays
  

• Normal power-up and boot
  
• Touchscreen, buttons, and rotary control
  
• Alarm functions
  
• Configuration and setup menus
  
• Trends and calculations
  
• Integrated thermal printer
  
• Patient Data Module communication
  
• ECG
  
• NIBP
  
• Nellcor OxiMax SpO₂
  
• Temperature
  

• Cardiac Output (CO)
  
• Invasive Blood Pressure (IBP)
  

• ECG
  
• NIBP
  
• Nellcor OxiMax SpO₂
  
• Dual Temperature
  
• Dual IBP
  
• Cardiac Output (CO)
  

• EK-Pro Arrhythmia Analysis
  
• DINAMAP Compatibility
  
• 12SL ECG Compatibility
  
• Drug & Hemodynamic Calculations
  
• Trend Storage
  
• Adult & Pediatric Profiles
  

• Integrated thermal printer
  
• Dual expansion module bay
  
• (2) GE dummy filler modules
  
• Rear USB ports
  
• DVI output
  
• Serial/ePort
  
• Ethernet
  
• X3 interface
  

• GE CARESCAPE B650 Monitor
  
• GE Patient Data Module (PDM)
  
• Integrated Thermal Printer
  
• (2) GE Dummy Expansion Modules
  
• Installed Rechargeable Battery
  
• Hospital-Grade Power Cord
  

• 5-Lead ECG Cable — REF ST5112S
  
• Adult Double-Tube NIBP Hose — REF SH9311D
  
• Adult Reusable NIBP Cuff (25–35 cm) — REF SC1721-3232
  
• Nellcor OxiMax Compatible SpO₂ Sensor — REF SP9310X
  
• Reusable Skin Temperature Probe — REF ST1304
  
• BD-Type IBP Adapter Cable — REF SP0207

• CO₂ module
  
• Additional plug-in parameter modules
  
• IBP transducers
  
• Disposable ECG, SpO₂, NIBP, or temperature accessories
  
• Printer paper
  
• User manual
  
• Pediatric accessories
  
• Rolling stand / mounting hardware
  
• Any accessories not specifically listed above

• Monitor powers on and passes the functional tests listed above.
  
• Installed battery powers the unit during testing; overall battery health is unknown. We recommend charging the battery overnight before first use.
  
• The PDM internal battery is not installed, and the rear cosmetic rubber battery cover is missing. The module functioned normally while installed in the monitor during testing.
  
• Included accessories are NEW CE-marked compatible replacements and are not OEM GE accessories.
  
• As with all pre-owned medical equipment, inspection, calibration, and performance verification by qualified biomedical personnel are recommended before clinical use.
  

Professionally packaged with protective cushioning and shipped fully insured.

Accessories may be packaged separately within the shipment.