Datascope Passport 2 Patien...
Datascope Passport 2 Patient Monitor – SpO₂,CO₂,2×IBP,ECG,NIBP,Temp,Print ~ 39864
Product details
Device Profile
Manufacturer: Datascope Corp.
Model: Passport 2 Patient Monitor
Part Number: 0998‑00‑0170‑4002A
Software Number: 0996‑00‑0045‑001
Serial Number: TM12699‑J4
Voltage Requirements: 100–240V AC, 50/60 Hz, 0.8–0.4A
CE Mark: CE 0044
Made In: USA
Display: Polychrome LCD
Printer: Installed Thermal Printer / Recorder
Installed Parameters:
- ECG / Resp
- NIBP
- 2× IBP
- SpO₂ (Masimo‑type)
- Temperature
- CO₂
Short Description
Datascope Passport 2 multiparameter bedside patient monitor with installed thermal printer and support for ECG, NIBP, IBP, Masimo‑type SpO₂, temperature, and CO₂. The unit powers on, completes self‑test, reaches the monitoring interface, and responds correctly to front‑panel controls. ECG, SpO₂, NIBP, and printer functions were successfully tested. IBP, CO₂, and temperature functions were not tested due to unavailable accessories.
Quick Condition Overview
Functional Status: Tested & Partially Verified
Cosmetic Condition: Very Good
Display Condition: Bright & Scratch‑Free
Battery Status: Installed batteries weak/dead — replacement recommended
Condition Summary
Cosmetics: Very good overall cosmetic condition with normal signs of prior clinical use. No major dents, cracks, or structural damage observed.
Display & Controls: Bright, clear polychrome LCD. Membrane keys, rotary knob, and control interface respond properly.
Printer: Installed thermal printer is present and fully functional. Test printouts were generated successfully.
Battery & RTC Status: Two internal batteries installed but weak/dead; replacement recommended.Incorrect date/time suggests RTC/clock battery service may also be required.
Testing Performed:
- Powers on and passes self‑test
- ECG waveform verified
- NIBP tested successfully
- SpO₂ tested successfully
- Printer tested and operational
- IBP, CO₂, and temperature untested
Physical Notes: Integrated carry handle and installed stand/mount intact and secure.
What Is Included
- Datascope Passport 2 patient monitor
- Installed thermal printer
- Power cord
- Reusable Masimo‑type SpO₂ adapter cable with ear‑lobe sensor (used)
- New adult NIBP hose — REF SH1010S
- New adult NIBP cuff — REF SC2711‑11
- Welch Allyn 5‑lead ECG cable with attached lead wires — REF 901006
- Items shown in images
What Is Not Included
- IBP cables / transducers
- Temperature probe
- CO₂ sampling lines / FilterLine accessories
- User manual
- Disposable sensors or consumables
- Pediatric or XL cuffs
- Additional accessories not shown
Buyer Advisory Note
This is a pre‑owned medical monitor. Internal batteries are weak/dead and should be replaced. RTC/date‑time battery service may also be required. Full biomedical inspection, calibration verification, and compatibility confirmation are recommended prior to clinical use.
Stock ID: 39864 (P.O. 3034) (WH104 SCC13)