2017 Philips IntelliVue MX4...

Product details

Voltage:                   100–240V AC | 50 / 60 Hz

Short description:

Philips IntelliVue MX450 bedside patient monitor equipped with M3001A Multi-Measurement Module and M3012A Hemodynamic Module. The system supports comprehensive patient monitoring including ECG, respiration, NIBP, Masimo SpO₂, invasive pressure, and temperature measurements. The monitor powers on, boots normally, and the touchscreen interface responds properly. The system includes new compatible patient monitoring accessories and remains in very good cosmetic and working condition.

Multi-Measurement Module (MMS)

• Model: M3001A    
• Option: A03C06    
• Serial Number: DE717K3917
• Date of Manufacture: 2007-08

Parameters Installed:

ECG, RESP, NIBP, TEMP, IBP, SpO₂ Type: Masimo

Hemodynamic Module

• Model: M3012A     
• Serial Number: DE83729383
• Date of Manufacture: 2009-07  
• Option: --
• Parameters: PRESS ×2 | TEMP ×2 

Connectivity / Hardware: LAN    DVI   USB    RS-232/5V
PRINTER: NOT INSTALLED
BATTERY: NOT INSTALLED

System Software / Options:

System Model: 866062   
Software Revision: M04.05-19

Installed Options:
A04, C01, C06, C09, C13, C15, C17, C18, C19, C20, C21, C44, C45, C50, C51, H10, J15, M15

Condition Summary:

Display Condition
The LCD display is bright and clear with good contrast. The touchscreen interface responds properly and the screen surface appears clean with no significant scratches observed.

Exterior Housing
The monitor housing is clean with minor cosmetic wear consistent with normal hospital use. No cracks or structural damage were observed.

Modules & Connectors
Both installed modules are properly seated and recognized by the system. Latches, module rails, and connectors are intact and appear in good condition.

Functionality / Testing Summary:

Power & Boot
The unit powers on and completes the boot sequence normally without system errors.

Navigation & Operation
Touchscreen navigation works properly. System menus, monitoring settings, and patient profiles are accessible.

Monitoring Performance
Physiological waveforms are visible and stable. NIBP measurement was verified. SpO₂, ECG, and temperature parameters were checked with compatible accessories and respond normally.

The hemodynamic module supports invasive pressure monitoring; however, IBP functionality was not fully tested during evaluation.

Included Accessories:

• Philips IntelliVue MX450 Patient Monitor
• M3001A Multi-Measurement Module
• M3012A Hemodynamic Module

New Compatible Accessories (Sino-K):

• NIBP Cuff SC1711-11 (35–27 cm)
• NIBP Hose SHT09105
• ECG Cable SG5124S
• SpO₂ Sensor SP9325B
• Temperature Probe ST1305
• IBP Adapter Cable SB0411
• AC Power Cord

What Is Not Included:

• Original Philips accessories
• User manual
• Patient accessories not listed above
• Rolling stand or mounting hardware

Buyer Advisory Note:
This device is intended for professional medical use. Calibration, configuration, and preventive maintenance may be required prior to clinical deployment depending on facility protocols.

Shipping Note:
The monitor and modules will be securely packaged using protective materials to ensure safe transit.

*Items shown in photos are the items that will ship.  If it is not shown in the photos, it is not included*

Stock ID : 39185 {P.O 3034} (WH104 SCC8)

Comments:

Kindly enlarge the images and see them with zooming.

Concern or query: Ask a Question

1. 1.    Overall Condition: As seen in images - Very Good
2. 2.    Physical Condition: Please review images before bidding - Very Good
3. 3.    Working Condition: The unit powers on and completes the boot sequence normally without system errors........Will receive item as pictured…………(Offered AS IS)
4. 4.    “As a whole; the item has not been tested technically or professionally at our end- unable to test --- being sold STRICTLY AS IS! Biomed check is strongly recommended before clinical use!”
5. 5.    Completeness: (with everything seen in the pictures. Please look at all pictures and go through detail description before bidding.)