HP/Agilent Viridia 24C Anes...

• Brand: Agilent   
• Model: M1041A (8-bay rack)    
• Serial Number: 3805G63926
• DOM: 10/2000    
• Capacity: 8 parameters slots
• Condition: Good overall; cosmetic scuffs/scratches; latch mechanisms intact
• Module interface cable cover missing (cosmetic only)

Modules & Supported Parameters:

1. NBP Module – AGILENT M1008B     S/N DE911E2843 – DOM 03/2002

2. ECG / RESP Module – HP M1002A    S/N 293-780-9575 – Option ABA

3. Temperature Module – HP M1029A    S/N 373-183-1109 – DOM 08/1997

4. SpO₂ / Pleth Module – HP M1020B    S/N 3343G19951 – SpO₂/Pleth enabled

5. IBP / Pressure Module – AGILENT M1006B  S/N DE805B3026 – DOM 06/2001

6. One Philips Dummy Module Installed

 Note on Module Rack Slots:
Module rack appears responsive overall; however, the last two bays with the dummy module may be less responsive/not synchronizing ideally. They can be repurposed for other supported modules such as CO2, printer, BIS, additional invasive pressures, vent modules, etc.

Condition:

• Monitor body, rack, and modules in good physical and functional condition
• Screen bright and sharp
• Cosmetic condition: used – may show minor handling wear
• No cracks, structural damage, or missing buttons
• Dummy module present
• Two rear cosmetic cable cover pieces missing on rack

Functionality Summary:

• Monitor powers on and passes self-test
• Boots to main screen normally
• Displays patient monitoring screens correctly
• Operator menus function correctly
• NBP inflates and measures (verified)
• ECG shows waveform when leads applied
• Temperature and RESP parameters enable normally
• IBP not fully tested due to lack of transducer set (disposable not included)
• SpO₂ displayed “No Transducer / Equipment Malfunction” when sensor not attached – expected behavior without sensor

All below (except where noted) are new, CE 0123 certified, manufactured by Shenzhen Sino-K Medical Technology, China:

• ECG Cable with 5-Lead Patient Lead Wire Set
• REF ST5124S,snap  lead wire connectors
• Reusable Skin Temperature Probe | REF ST1305
• Adult NIBP Single Tube Hose Adapter | REF SH0910S
• IBP Adapter Cable – Medex / Abbott Type | REF SB0411
• Reusable Adult NIBP Cuff | Size 35 × 27 cm | REF SC2711-11
• Reusable SpO₂ Sensor – Nellcor Type | REF SP9119B
• OEM Philips SpO₂ Extension Cable | REF M1900B [ Note: Cable sheath has an insulation tear near the sensor connector and has been taped (blue).]
• Monitor to Module Rack Interface Cable
• Hospital-grade power cord

Not Included:

• No printer module
• No EtCO₂ module
• No BIS
• No invasive transducers
• No disposables or consumables other than listed
• No OEM manual

Buyer Notes:

Condition: USED, please refer to images for cosmetic condition.