2012 GE Dash 5000 Patient M...
2012 GE Dash 5000 Patient Monitor | OxiMax SpO₂ W/ NEW Leads & Battery ~ 38402
Item specifics
- Used
- Model
- Dash 5000
MPN- 2035598-303
Product details
Manufacturer | GE Healthcare |
Item: | 2012 GE Dash 5000 Patient Monitor | OxiMax SpO₂ W/ NEW Leads & Battery |
Model/Cat # | DASH 5000 / 2035598-303 |
Serial No. | SHQ12525020SA |
Made In: | USA |
Date of Manufacture: | 2012 |
Voltage: 100–120 / 200–240 VAC, 50–60 Hz, 2.0 / 1.0 A
Short description:
GE Dash 5000 Adult ICU bedside patient monitor in fully functional condition, configured with ECG/Respiration, SpO₂ (Nellcor OxiMax technology), NIBP (DINAMAP® SuperSTAT), invasive blood pressure, temperature, CO₂ with cardiac output capability, and an installed, responsive thermal printer. The monitor powers on, passes self-test, displays clear waveforms, and allows full menu navigation. Supplied with a complete set of new compatible non-OEM accessories and an integrated plastic base / stand-mount socket.
Software Configuration (Verified):
- Admit Menu Type: Standard
- Patient Monitor Type: Adult – ICU
Enabled Software Options:
- Invasive Blood Pressure (IBP)
- CO₂
- Network
- Cardiac Output
- Atrial Fibrillation Detection
- ECG Intellitrate
NIBP System:
DINAMAP® SuperSTAT
Installed / Available Parameters:
(Availability depends on connected accessories)
- ECG
- Respiration (RR)
- SpO₂ – Nellcor OxiMax technology
- Non-Invasive Blood Pressure (NIBP)
- Invasive Blood Pressure (ART)
- Temperature (TP)
- CO₂ with cardiac output support
- Alarms and waveform monitoring
- Thermal printer (installed and responsive)
- Battery A: Installed and charging
- Battery B: Not installed
Condition:
- Excellent overall cosmetic condition
- Bright, clear LCD with no cracks; light cosmetic marks only
- Front and rear housings intact, no dents or structural damage
- Carry handle intact
- Side parameter ports clean and intact
- Printer door intact
- All soft keys and trim knob responsive
- Integrated plastic base / stand-mount socket present
- Powers on normally and passes self-test
- Stable operation observed
- ECG, SpO₂ (OxiMax), NIBP, IBP, RR, temperature, and CO₂ recognized
- Waveforms and numeric values display correctly
- Menus, alarms, waveform selection, and trends navigable
- Printer responds to commands (no paper installed)
- Only expected alerts appear for disconnected sensors
- AXIS Surgical A.E.P.O.A007C3A GE ECG single-piece cable with lead wires
- Reusable skin temperature probe, Ref. ST1304
- IBP adapter cable, Ref. SB0207 (BD transducer type)
- Reusable direct-type SpO₂ sensor, Ref. SP9310W
- Adult NIBP cuff, 25 × 35 cm, Ref. S71721-3232
- Adult double-tube NIBP hose, Ref. SH3931D
- One internal battery installed
- Hospital-grade power cord
- Integrated plastic base / stand-mount socket
- IBP transducers
- CO₂ sampling lines or sensors
- Printer paper
- Rolling stand or pole mount
- User manual
- Any accessories not explicitly listed above
- Box Dimensions: 18 × 18 × 16 inches
- Weight: 24 lbs
*Items shown in photos are the items that will ship. If it is not shown in the photos, it is not included*
Stock ID : 38402 (P.O 4018) (WH104 SCC2)
Comments:
Kindly enlarge the images and see them with zooming.
Concern or query: Ask a Question
Condition: USED, please refer to images for cosmetic condition.
- 1. Overall Condition: As seen in images - Very Good
- 2. Physical Condition: Please review images before bidding - Very Good
- 3. Working Condition: Has been tested at our end and the functionality has been shown in the image section....Will receive item as pictured…………(Offered AS IS)
- 4. “As a whole; the item has not been tested technically or professionally at our end- unable to test --- being sold STRICTLY AS IS! Biomed check is strongly recommended before clinical use!”
- 5. Completeness: (with everything seen in the pictures. Please look at all pictures and go through detail description before bidding.)