GE Dash 4000 Patient Monito...
GE Dash 4000 Patient Monitor (Printer/IBP/NIBP/ECG/TEMP)W/ NEW Leads ~ 38306
Item specifics
- Used
- Model
- Dash 4000MPN
- Does not apply
Product details
Manufacturer | GE Medical Systems |
Item: | GE Dash 4000 Patient Monitor (Printer/IBP/NIBP/ECG/TEMP) W/ NEW Leads |
Model/Cat # | Dash 4000 |
Serial No. | B3DJ5581G |
Made In: | USA |
Date of Manufacture: | U/K |
Voltage: 100-240V 50-60Hz 2.0-1.0A
Short description:
GE Dash 4000 patient monitor with internal printer, dual batteries, and multiple monitoring hardware ports. The unit has been tested with ECG, NIBP, Temperature, and IBP cables and is functioning normally. LCD is bright and clear and soft keys are responsive. The system boots fully and operates as expected. CO₂ hardware is installed but CO₂ software is not active.
System Batteries: Two installed (Battery A & Battery B)
Printer: Internal strip-chart recorder installed and working
Installed Hardware (per rear ports):
- 2× IBP
- TEMP / CO
- SpO₂ (technology type unknown)
- ECG / EKG
- NIBP
- CO₂ hardware present (software NOT enabled)
Battery Doors: Intact
Stand Plate: Installed on bottom
Left Printer Bay: Contains active printer
Right Expansion Bay: Empty
Software Configuration:
Admit Menu Type: Standard
Patient Monitor Type: Operating Room
Enabled Software Options:
- BP
- Network
- Cardio-Pulmonary
- Cardiac
- ECG Intellitrate
Condition:
- Good cosmetic condition
- No dents or cracks in the housing
- Minor scuffs, scratches, and normal-use wear
- LCD bright, clean, and scratch-free
- Soft keys respond correctly
- Internal printer in working order
- Battery A: Charges and holds charge
- Battery B: “No Communication”
- Ports clean and intact
- Unit powers on and boots normally
- Monitoring parameters tested and showing correctly: ECG – ON | NIBP – ON | RR – ON | ALARM – ON | PA2 (IBP) – ON | TP1 (Temperature) – ON
- Internal printer functions properly
- Software menus accessible
- Trim knob fully responsive
- CO₂ hardware present; CO₂ software not installed
- Battery menu shows: Battery A: FULL, good quality | Battery B: NO COMM
- No error codes during testing
Included:
- GE Dash 4000 Patient Monitor
- Reusable Temperature Probe (Skin) – ST1304
- IBP Adapter Cable – SB0407 (Medex/Abbott type)
- Adult NIBP Adapter Hose, Double Tube – SH3931D
- ECG 5-Lead Cable (Direct Type) – SG5112S
- Reusable Adult NIBP Cuff (25 × 35 cm) – SC1721-3232
- Two Batteries (one working, one “No Comm”)
- Installed Strip Printer
- SpO₂ sensor / extension cable
- CO₂ sensor
- Rolling stand
- Printer paper
- User manual
- PM / service records
- Any disposable or single-use accessories
- Any cables, leads, or items not specifically listed above
*Items shown in photos are the items that will ship. If it is not shown in the photos, it is not included*
Stock ID : 38306 (P.O 4018) (WH104 SCC14)
Comments:
Kindly enlarge the images and see them with zooming.
Concern or query: Ask a Question
Condition: USED, please refer to images for cosmetic condition.
- 1. Overall Condition:- As seen in images - Very Good
- 2. Physical Condition: Please review images before bidding - Very Good
- 3. Working Condition: Has been tested at our end and the functionality has been shown in the image section......Will receive item as pictured ……………(offered AS IS)
- 4. “As a whole; the item has not been tested technically or professionally at our end- unable to test --- being sold STRICTLY AS IS! Biomed check is strongly recommended before clinical use!”
- 5. Completeness: (with everything seen in the pictures. Please look at all pictures and go through detail description before bidding.)