For orders, please call: 952-232-5970

$0Checkout 0 Item(s)

MENU

    

GE Dash 4000 Monitor – SpO2...

        

GE Dash 4000 Monitor – SpO2/IBP/Temp/NBP/ECG/CO₂ – For Parts/Repair ~ 38310

Item specifics

Condition
For parts or not working
Seller Notes
“Pre-owned GE Dash 4000 multiparameter patient monitor with Masimo SET SpO₂, dual IBP, CO₂, Temp/CO, NIBP (SuperSTAT),ECG hardware installed. Unit powers on but enters a reboot loop, preventing full testing."
Model
Dash 4000
MPN
Does not apply

More details


$55.20

38310

Availability: This product is no longer in stock.

Product details

Manufacturer

GE Medical Systems

Item:

GE Dash 4000 Monitor – SpO2/IBP/Temp/NBP/ECG/CO₂

Model/Cat #        

Dash 4000

Serial No.        

L3EH8076G

Made In:             

USA

Date of Manufacture:  

U/K

Voltage:                  100–240 V AC • 50/60 Hz • 75 W

                   

Short description:

GE Dash 4000 multiparameter patient monitor with Masimo SET SpO₂, dual IBP, CO₂, Temp/CO, NIBP (SuperSTAT), and ECG hardware installed. The monitor powers on but reboots repeatedly, preventing full testing. Front bezel has significant cracks, and the LCD shows a small dead-pixel spot near the center. Printer is present but missing the internal roller. Unit is being sold AS-IS for parts or repair.

Software Features:

 

  • Dinamap SuperSTAT NIBP Algorithm
  • 12SL ECG Analysis Program Installed

Installed Hardware Parameters:

  • 2 × IBP (BP1/3, BP2/4)
  • SpO₂ – Masimo SET
  • Temp / Cardiac Output (CO)
  • NIBP (SuperSTAT)
  • ECG / EKG
  • CO₂ (capnography)
Printer: Installed, but paper roller is missing; functionality unknown
Battery Bay: Dual-slot battery compartment, batteries not installed, battery door intact
Stand Mount: Bottom stand/mount hardware not installed

 

Condition:

Cosmetic Condition:
  • Front bezel cracked, especially around the soft key bar area (visible in images)
  • LCD bright but shows a noticeable dead pixel area in the center
  • Rear bezel/housing in good overall shape with some paint and surface scuffing
  • Parameter bay ports clean and structurally intact
  • Battery door intact, battery slots empty
  • No bottom stand mount hardware
Mechanical & Internal Condition:
  • Printer installed but roller missing, so printer cannot be tested
  • Fans, ports, housing, and side plastics intact
  • Parameter labeling intact and readable
Functionality Summary:
  • Monitor powers on, boots, shows startup screen
  • After startup, the device reboots repeatedly (boot loop)
  • Due to rebooting, no parameter testing could be completed
  • Printer functionality unknown (missing roller)
  • LCD powers on, brightness is good, but has central pixel defect
  • Buttons and trim knob not fully tested due to reboot loop
  • Sold AS-IS / for parts—not a functioning unit

Included:
  • GE Dash 4000 Patient Monitor
  • Power cord
Not Included:
  • No batteries
  • No ECG cable
  • No NIBP cuff
  • No SpO₂ sensor
  • No IBP transducers
  • No Temp/CO accessories
  • No CO₂ sampling accessories
  • No printer roller
  • No bottom stand mount
  • No user manual

 

 

*Items shown in photos are the items that will ship.  If it is not shown in the photos, it is not included*

 

Stock ID : 38310 (P.O 4018) (WH104 SCC15) 

 

Comments:

Kindly enlarge the images and see them with zooming.

Concern or query: Ask a Question

Condition: Parts Only, please refer to images for cosmetic condition.

  1. 1.    Overall Condition: As seen in images : AS-IS
  2. 2.    Physical Condition: Please review images before bidding : Fair
  3. 3.    Working Condition: Sold AS-IS / for parts—not a functioning unit.......Will receive item as pictured…………(Offered AS IS)
  4. 4.    “As a whole; the item has not been tested technically or professionally at our end- unable to test --- being sold STRICTLY AS IS! Biomed check is strongly recommended before clinical use!”
  5. 5.    Completeness: (with everything seen in the pictures. Please look at all pictures and go through detail description before bidding.)