GE Dash 4000 Patient Monito...
GE Dash 4000 Patient Monitor, EKG Masimo SpO₂, NIBP, Temp, Dual IBP, Print~38721
Item specifics
- Used
- Model
- Dash 4000
MPN- 2035598-203
Product details
Manufacturer | GE Medical Systems |
Item: | GE Dash 4000 Patient Monitor (ECG, Masimo SpO₂, NIBP, Temp, Dual IBP, Printer) W/ 2x Batteries & NEW Leads |
Model/Cat # | Dash 4000 / Ref 2035598-203 |
Serial No. | SD007514451GA |
Made In: | USA |
Date of Manufacture: | 12-2007 |
Voltage: 100-240V 50-60Hz 2.0-1.0A
Short description:
The GE Dash 4000 is a high-acuity, OR/ICU-grade patient monitor designed for critical care and transport use. This unit powers on normally, loads the clinical interface, and all installed parameters—ECG, SpO₂ (Masimo SET), NIBP, 2× IBP, Temperature, and Respiration—are active and functional. The thermal printer is installed, tested, and prints correctly.
CE Mark: CE 0459
NBP Technology: DINAMAP® SuperSTAT
SpO₂ Technology: Nellcor OxiMax®
Printer: Installed and fully functional
Software Configuration:
- Admit Menu Type: Standard
- Patient Monitor Type: Operating Room
- Enabled Options: 2× BP, CO₂, 12SL, ACI-TIPI, Hi-Res Trends, Network, Cardio-Pulmonary, Cardiac
- NBP: DINAMAP® SuperSTAT
- ECG
- NIBP
- SpO₂ (Masimo SET)
- 2× IBP (ART1, ART2)
- Temperature (TP1)
- Respiration (RR) – parameter present and functional; RR display was set to OFF during photos
- Alarms
Condition & Functionality:
Overall Condition: Good used condition with normal wear
LCD: Clear, bright, free of pixel defects
Casing:
- Front: clean
- Rear bezel: has several stress cracks (cosmetic; does not affect function)
- Ports: Clean, intact, no damage
- Handle: Solid and secure
- Printer: Installed & working
- CO₂: Not installed
Functional Testing:
- Boots normally and completes self-test
- ECG waveform stable
- NIBP cycles and reads correctly
- SpO₂ responds with new Masimo sensor
- IBP ×2 channels active; IBP adapter cable included
- Temperature channel active
- Respiration (RR) available and functional
- Alarms respond and adjust
- Printer tested successfully
Cosmetic Rating: 7.5-8/10
Battery Status:
Both battery bays show NO COMM:
- No recognized communication
- Charge level unknown
- Time-to-empty and time-to-full unknown
- Battery quality unknown
Conclusion:
✔ Both batteries are dead / non-functional
✔ Replacement strongly recommended
✔ Unit operates normally on AC power
- (1) GE Dash 4000 Patient Monitor (P/N 2035598-203)
- (1) New NIBP Hose (REF SH3931D)
- (1) New Adult NIBP Cuff 25–35 cm (REF SC1721-3232)
- (1) New ECG Cable, 5-Lead SNAP AHA (REF SG5112S)
- (1) New Masimo SET Reusable SpO₂ Sensor (REF SP9119W)
- (1) New Reusable SpO₂ Adapter Cable – Masimo type
- (1) New Reusable Temperature Probe – Skin Type (REF ST1304)
- (1) USA Power Cord
- (1) Device Stand Base Plate
- (1) IBP Transducer Cable (no disposable pressure transducers included)
- CO₂ hardware / sampling lines
- Disposable IBP transducers
- Printer paper rolls beyond test print
- Additional accessories
- Printed user manual
*Items shown in photos are the items that will ship. If it is not shown in the photos, it is not included*
Stock ID : 38721 (P.O 4018) (R2 C7)
Comments:
Kindly enlarge the images and see them with zooming.
Concern or query: Ask a Question
Condition: USED, please refer to images for cosmetic condition.
- 1. Overall Condition:- As seen in images - Very Good
- 2. Physical Condition: Please review images before bidding - Good
- 3. Working Condition: Has been tested at our end and the functionality has been shown in the image section......Will receive item as pictured ……………(Offered AS IS)
- 4. “As a whole; the item has not been tested technically or professionally at our end- unable to test --- being sold STRICTLY AS IS! Biomed check is strongly recommended before clinical use!”
- 5. Completeness: (with everything seen in the pictures. Please look at all pictures and go through detail description before bidding.)