2013 GE Dash 4000 (Masimo S...
2013 GE Dash 4000 (Masimo SpO₂, ECG, NIBP, Temp, Printer ) & Leads ,Tested~38702
Item specifics
- Used
- Model
- Dash 4000
MPN- 2035598-202
Product details
Manufacturer | GE Medical Systems |
Item: | GE Dash 4000 Monitor (T/CO, SpO2, ECG, NBP) W/ 2x Batteries & NEW Leads |
Model/Cat # | Dash 4000 / Ref 2035598-202 |
Serial No. | SHQ13311554SA |
Made In: | USA |
Date of Manufacture: | 2013-08 |
Voltage: 100-240V 50-60Hz 2.0-1.0A
Short description:
The GE Dash 4000 is a compact, high-acuity bedside and transport monitor designed for ICU, step-down, ED, and procedural environments.
This 2013 MASIMO-equipped unit supports ECG, NIBP, SpO₂ (MASIMO SET®), Respiration, and Temperature (TP1) and includes a working thermal recorder/printer.
The display is bright and clear, with responsive keys and stable parameter performance.
Housing shows two to three small stress cracks in the back bezel—common in Dash series units.
Two batteries are installed, but both report NO COMM, appear non-functional, and should be replaced.
CE Mark: CE 0459
NBP Technology: DINAMAP® SuperSTAT
SpO₂ Technology: MASIMO SET®
Software Configuration:
- Admit Menu Type: Standard
- Monitor Type: Adult – ICU
- Enabled Software Options: NIBP, Network, Cardiac, Atrial Fibrillation, ECG IntelliRate
- CO₂ Hardware: NOT installed (hardware OR software)
- ECG: ON
- SpO₂ (MASIMO): ON
- NIBP: ON
- Respiration (RR): ON
- Temperature (TP1): ON
- Alarms: ON
- Overall Condition: Very Good – Functional
- LCD Screen: Bright, no lines or dead pixels
- Printer: Installed and working
- Housing: Structurally solid | 2–3 small stress cracks on the rear bezel (common in these models)
- Handle: Secure
- Ports/Connectors: Clean and functional
- Surface: Light scuffs from routine use
- Cosmetic Rating: 7.5–8/10
Battery Status (from images)
- Battery A: NO COMM – not charging
- Battery B: NO COMM – not charging
- Unit powers on and passes internal diagnostics
All installed parameters functional:
ECG – stable waveforms
NIBP – inflation/deflation cycling properly
MASIMO SpO₂ – reads normally with included sensor
Temperature (TP1) – responsive
Respiration (RR) – stable impedance readings
- CO₂ is NOT installed
- Alarm system functional and adjustable
- (1) GE Dash 4000 Monitor (REF 2035598-202, DOM 08/2013)
- (2) GE Li-Ion Batteries (non-functional – NO COMM)
- (1) New NIBP Hose (REF SH3931D)
- (1) New Adult NIBP Cuff 25–35 cm (REF SC1721-3232)
- (1) New ECG Cable, 5-Lead SNAP AHA (REF SG5112S)
- (1) New Reusable SpO₂ Sensor – MASIMO Compatible (REF SP9310W)
- (1) New Reusable Temperature Probe, Skin Type (REF ST1304)
- (1) USA Power Cord
- (1) Device Base Plate
- CO₂ module / sampling lines
- IBP cable or pressure transducer
- Disposable ECG electrodes
- User manual (printed)
- Additional accessories not listed
*Items shown in photos are the items that will ship. If it is not shown in the photos, it is not included*
Stock ID : 38702 (P.O 4018) (WH104 SCC13)
Comments:
Kindly enlarge the images and see them with zooming.
Concern or query: Ask a Question
Condition: USED, please refer to images for cosmetic condition.
- 1. Overall Condition:- As seen in images - Very Good
- 2. Physical Condition: Please review images before bidding - Very Good
- 3. Working Condition: Has been tested at our end and the functionality has been shown in the image section......Will receive item as pictured ……………(offered AS IS)
- 4. “As a whole; the item has not been tested technically or professionally at our end- unable to test --- being sold STRICTLY AS IS! Biomed check is strongly recommended before clinical use!”
- 5. Completeness: (with everything seen in the pictures. Please look at all pictures and go through detail description before bidding.)
