Item Overview
Lot of 2 pre-owned 3M Bair Hugger 700 Series patient warming hose assemblies, configuration consistent with replacement hose REF 90046, for compatible Models 750/775.
Each hose includes a sensor cable with electrical connector, warmer-side retaining collar, blanket-side swivel adapter, and blanket holding clamp.
Both hoses exhibit multiple localized internal support-wire/corrugation deformation areas. Visually inspected only; sold AS-IS / untested.

Device Information
Manufacturer: 3M / Bair Hugger | Series: 700 Series
Item: Patient Warming Hose Assembly | Quantity: Set of 2
Reference: 90046 (Configuration-Based / Unverified) | Models: 750 / 775
Hose Lots: 128442 / Unmarked | Condition: Pre-Owned / AS-IS
Hose Type: White Corrugated Air Hose | Sensor Cables: 2 Included
Sensor Connection: 7-Pin Connector | Testing: Visual Inspection Only
Warmer End: Retaining Collar | Blanket End: Swivel Adapter
Blanket Holding Clamps: 2 Included

Condition & Inspection
Hose 1 – Lot 128442

• Four localized areas of internal support-wire/corrugation deformation: two near the warmer-side connector and two near the blanket-side adapter.
  
• Affected areas marked with red marker and photographed.
  
• Normal cosmetic wear and surface discoloration.
  
• No obvious through-wall cuts or tears observed during visual inspection.
  

Hose 2 – Lot Number Unmarked

• Three localized areas of internal support-wire/corrugation deformation: two in the middle section and one toward the warmer-side connector.
  
• Affected areas marked with red marker and photographed.
  
• Previous adhesive/tape residue remains on portions of the hose exterior.
  
• Normal surface wear and discoloration.
  
• No obvious through-wall cuts or tears observed during visual inspection.
  

Both hoses retain their sensor cables, electrical connectors, retaining collars, swivel adapters, and blanket holding clamps.

Functional Testing
Visual inspection only. No powered airflow, leakage, electrical continuity, sensor, or temperature testing performed.
Internal support integrity, airtightness, sensor operation, and overall functionality remain unknown.

Included

• 2 Bair Hugger warming hose assemblies
  
• 2 Sensor cables with electrical connectors
  
• 2 Warmer-side retaining collars
  
• 2 Blanket-side swivel adapters
  
• 2 Blanket holding clamps
  

Not Included
Warming units, warming blankets, manuals, or additional accessories.

Buyer Advisory
SOLD AS-IS / UNTESTED.
Both hoses exhibit multiple areas of internal support-wire/corrugation deformation. Lot 128442 has four identified deformation areas, while the unmarked hose has three identified deformation areas and residual adhesive/tape marks. All affected areas are highlighted in the photographs with red marker.

No obvious through-wall cuts or tears were observed during visual inspection; however, internal support integrity, airtightness, and electrical/sensor functionality have not been verified.

Buyers should carefully review all photographs, particularly the red-marked areas showing the observed deformation.

REF 90046 identification and Model 750/775 compatibility are configuration-based and have not been independently confirmed. Qualified inspection and appropriate testing are recommended before any intended use.

Sale includes the exact set of two hose assemblies pictured.