2x 3M Bair Hugger 700 Serie...
2x 3M Bair Hugger 700 Series 750/775 Warming Hose 90046 Sensor Clamp AS-IS~40774
Item specifics
Condition
Used
Seller Notes
Product details
3M Bair Hugger 700 Series Warming Hoses w/ Sensor & Clamp – Lot of 2 – AS-IS
Item Overview
Lot of 2 pre-owned 3M Bair Hugger 700 Series patient warming hose assemblies, configuration consistent with replacement hose REF 90046, intended for compatible Models 750/775.
Each hose includes an integrated sensor cable with a 7-pin connector, warmer-side retaining collar, blanket-side swivel adapter, and blanket holding clamp.
Both hoses exhibit localized corrugation deformation as detailed below. Visually inspected only; sold AS-IS / untested.
Device Information
Manufacturer: 3M / Bair Hugger | Series: 700 Series
Item: Patient Warming Hose Assembly | Quantity: lot of 02
Reference: 90046 (Configuration-Based / Unverified) | Models: 750 / 775
Hose Type: White Corrugated Air Hose | Condition: Pre-Owned / Untested
Sensor Connection: 7-Pin Electrical Connector | Sensor Cables: 2 Included
Warmer End: Retaining Collar | Blanket End: Swivel Adapter
Blanket Holding Clamps: 2 Included | Testing: Visual Inspection Only
Condition & Inspection
- Both hoses show normal signs of previous use, including surface marks and minor discoloration.
- Localized corrugation flattening or deformation is present on both hoses, with possible distortion of the internal support structure.
- Affected areas are identified in the photographs using red marker and finger-pointing close-ups.
- No obvious through-wall cuts, punctures, or tears were observed during visual inspection.
- Both hoses retain their sensor cables, electrical connectors, retaining collars, swivel adapters, and blanket holding clamps.
- Internal support integrity and airtightness have not been verified.
Functional Testing
Visual inspection only. No powered airflow, leakage, electrical continuity, sensor, or temperature testing was performed.
Functional condition, sensor operation, and hose integrity remain unknown.
Included
- 2 Bair Hugger warming hose assemblies
- 2 Sensor cables with 7-pin connectors
- 2 Warmer-side retaining collars
- 2 Blanket-side swivel adapters
- 2 Blanket holding clamps
Not Included
Warming units, warming blankets, manuals, or other accessories.
Buyer Advisory
SOLD AS-IS / UNTESTED. Both hoses exhibit localized corrugation deformation, potentially involving their internal support structures. No obvious through-wall tears were identified visually; however, airtightness, electrical integrity, and operational safety have not been verified.
Buyers are requested to carefully review all photographs, particularly the red-marked and finger-indicated areas.
REF 90046 identification and Model 750/775 compatibility are based on configuration and have not been independently confirmed. Qualified inspection and appropriate safety testing are required before clinical use.
Safety Warning: Do not direct warming air onto a patient without an attached compatible Bair Hugger warming blanket. Thermal injury may result.
Sale includes the exact two hose assemblies pictured.
Stock ID: 40774 (P.O. 4017) (WH555)