Product details

Beckman Coulter SPINCHRON DLX Benchtop Centrifuge w/ GH‑3.8A Swing‑Bucket Rotor – Tested

Item Overview

Pre‑owned Beckman Coulter SPINCHRON DLX non‑refrigerated benchtop centrifuge in good cosmetic and fully tested functional condition. Equipped with a GH‑3.8A four‑place swing‑bucket rotor, four buckets, and interchangeable tube inserts.

The centrifuge was tested through multiple operating cycles using programmed speeds from 1,000 RPM to 3,750 RPM, with 1‑, 2‑, and 5‑minute timed runs. Minimum/maximum acceleration, deceleration, and Fast Stop were verified.

The rotor accelerated smoothly, maintained programmed speed, decelerated properly, and completed each cycle automatically with no excessive vibration or abnormal mechanical noise. Front‑panel controls are responsive, the digital display is bright, and both the mechanical lid lock and electronic interlock operate correctly.

Normal cosmetic wear is present from previous laboratory use. No major dents or structural cracks observed. The wheeled transport dolly shown in photos is not included.

Device Information

• Manufacturer: Beckman Coulter, Inc.

• Item: SPINCHRON DLX Benchtop Centrifuge

• Model / Catalog #: SPINCHRON DLX | Cat. No. 365303

• Serial Number: GHY05G13

• Country of Manufacture: USA

• Electrical Rating: 120 VAC • 60 Hz • 10 A

Installed Rotor Configuration

Rotor

• Manufacturer: Beckman

• Model: GH‑3.8 / GH‑38A

• Serial Number: 06LU‑44281

• Type: Four‑Place Swing‑Bucket Rotor

• Maximum Speed: 3,750 RPM

Buckets (Included)

• 4 × Beckman GH‑3.8 / GH‑38A Swing Buckets

Tube Inserts (Included)

• 2 × Purple 18‑position inserts

• 2 × Orange 24‑position inserts

• Total Capacity: ~84 tubes

All buckets swing freely, lock securely, and inserts fit properly with normal cosmetic wear.

Tested Functions 

• RPM Programming: Verified from 1,000–3,750 RPM

• Timer Cycles: 1‑, 2‑, and 5‑minute runs verified

• Acceleration / Deceleration: Minimum through maximum tested

• Fast Stop: Operational

• Cycle Completion: Automatic cycle completion verified

• Speed Stability: Maintains programmed RPM

• Display & Controls: Bright digital display; front‑panel buttons responsive

• Lid Lock / Interlock: Mechanical and electronic locks verified

• Rotor Operation: Smooth rotation; no abnormal noise or vibration

Condition Summary

Cosmetic Condition

• Good overall pre‑owned condition

• Minor scratches, scuffs, and localized paint wear

• No major dents or structural cracks

• Control panel clean and intact

• Digital display bright and scratch‑free

• Membrane buttons intact and responsive

• Rotor chamber clean with normal wear

• Rotor arms and pivots clean and undamaged

Functional Condition

• Powers on properly

• Fully tested

• Rotor and drive system operate smoothly

• Speed stable throughout testing

• Timer functions correctly

• Lid lock and electronic interlock verified

• Fast Stop functional

• Smooth acceleration and deceleration

• No excessive vibration or abnormal noise

Included

• Beckman Coulter SPINCHRON DLX Centrifuge

• Beckman GH‑3.8 / GH‑38A Swing‑Bucket Rotor

• 4 × Swing Buckets

• 2 × Purple 18‑Position Tube Inserts

• 2 × Orange 24‑Position Tube Inserts

• Attached Power Cord

Not Included

• User Manual

• Sample Tubes

• Additional Rotors

• Additional Tube Inserts

• Calibration Documentation

• Wheeled Transport Dolly

• Any accessories not shown

Quick Condition Snapshot

• Cosmetic: Good condition with normal scratches and minor paint wear

• Mechanical: Rotor, buckets, pivots, lid lock, and drive system operate smoothly

• Functional: Fully tested; completed multiple cycles up to 3,750 RPM with verified timer, acceleration, deceleration, and Fast Stop

Buyer Advisory

This is a pre‑owned laboratory centrifuge that has been cleaned, inspected, and function‑tested. Testing was limited to the operational functions described. Buyer is responsible for verifying compatibility with their intended application. Review all listing photographs carefully.

Shipping

Ships via professionally palletized LTL freight. The transport dolly shown in photos is not included. Shipment includes tracking and full insurance for the purchase value.

Stock ID: 40021 (P.O. 2026) (WH104)

Purchase Terms & Buyer Protections

Condition & Use Notice

Condition: Overall, cosmetic, and functional condition are described in the listing above; please review all images carefully.
Functionality: Sold as described in the listing, or untested if stated. Biomed evaluation is recommended where applicable.
Included: Only items shown in photographs or specifically stated in the listing are included.
Buyer Responsibility: Buyer is responsible for verifying compatibility, suitability, and obtaining inspection, calibration, maintenance, or service as appropriate prior to use.