Pre‑owned Furniss Phoenix 1850 Knee CPM machine in good cosmetic and fully tested functional condition. The unit was cleaned, inspected, and run through multiple operating cycles using various combinations of flexion, extension, speed, and pause settings. Motion remained smooth throughout testing with no abnormal noises, hesitation, or binding.

The OEM digital hand controller was fully tested. All functions responded correctly, LED displays are bright and clear, and the controller communicates properly with the CPM during operation.

The machine shows signs of careful previous use with normal cosmetic wear. No dents or cracks observed. Sale includes the CPM unit, OEM hand controller, AC power adapter, power cord, and printed user manual.

Disposable pads and stabilizer rods are not included.

• Manufacturer: The Furniss Corporation Ltd.
  

• Series: Phoenix Series
  

• Item: Knee Continuous Passive Motion (CPM) Machine
  

• Model: 1850
  

• Serial Number: 1850‑102438
  

• Country of Manufacture: USA
  

• Electrical Rating: 120 VAC • 60 Hz • 17 W

• Flexion / Extension — Smooth motion throughout tested range
  

• Speed & Pause — Adjustments verified
  

• Start/Stop — Fully functional
  

• Hand Controller — LED display bright; ROM display functional; Up/Down buttons responsive; ~10 ft cable intact
  

The machine completed multiple continuous cycles smoothly with no excessive vibration, sticking, or abnormal mechanical noise.

• Good overall pre‑owned condition
  

• Signs of careful previous use
  

• No dents or cracks
  

• Minor scratches and scuffs from normal use
  

• Chrome frame straight and clean
  

• Powder‑coated base structurally sound
  

• Cables free of tears or damage
  

• Foot cradle assembly intact
  

• All adjustment knobs present
  

• Hinges, pivots, and linkages clean and operating properly
  

• Fully tested and confirmed operational
  

• Smooth flexion/extension throughout tested range
  

• Motor and drive assembly operate properly
  

• Hand controller fully functional
  

• All adjustments verified
  

• LED displays bright and stable

• Furniss Phoenix 1850 Knee CPM Machine
  

• OEM Digital Hand Controller
  

• AC Power Adapter and Power Cord
  

• Printed User Manual

• Foot boot (disposable)
  

• Calf pad (disposable)
  

• Thigh pad (disposable)
  

• Bed stabilizer rods
  

• Any accessories not shown

• Cosmetic: Good pre‑owned condition with minor scratches from normal use
  

• Mechanical: Excellent mechanical condition; frame, hinges, and linkages operate properly
  

• Functional: Fully tested; all controller functions verified; unit performs smooth continuous cycles

This is a pre‑owned rehabilitation device that has been professionally cleaned, inspected, and function‑tested. Disposable patient‑contact accessories are not included. Review all listing photographs carefully, as they form part of the item description.

The CPM machine will be professionally packaged, with the controller, power adapter, power cord, and manual secured inside the carton. Shipment includes tracking and full insurance for the purchase value.