Product details

Furniss Phoenix 1850 Knee CPM Machine w/ OEM Hand Controller & Manual – Tested Working

Item Overview

Pre‑owned Furniss Phoenix 1850 Knee Continuous Passive Motion (CPM) Machine in good cosmetic and fully tested functional condition.

The unit was cleaned, inspected, and run through multiple continuous cycles verifying flexion, extension, ROM, speed, pause, and Start/Stop functions. Motion remained smooth, quiet, and vibration‑free with proper acceleration and reversal throughout testing.

The OEM digital hand controller was fully tested; all buttons respond correctly, LED displays are bright, and communication with the CPM remained stable. Frame adjustments for calf, thigh, foot cradle, and footplate angle operate smoothly and lock securely.

Normal cosmetic wear is present. No major dents or structural cracks observed. The AC adapter powers the unit properly; the cable has one taped outer‑insulation tear (cosmetic only).

Sale includes only the items shown in the listing photographs.

Device Information

• Manufacturer: The Furniss Corporation Ltd.
  

• Series: Phoenix
  

• Model: 1850
  

• Serial #: PH50‑91298
  

• Country: USA
  

• Electrical: 120 VAC • 60 Hz • 17 W
  

Included AC Adapter

• Model: 03041
  

• Input: 120 VAC • 60 Hz • 17 W
  

• Output: 14 VDC • 730 mA

Specifications

• Weight: ~26 lb
  

• Dimensions: 28 in overall length; adjustable up to 42 in; 13 in width
  

• Range of Motion: –5° to 110°
  

• Pause Interval: 0–30 seconds
  

• Limb Length Capacity: 20–42 in
  

• Calf Adjustment: 11–24 in
  

• Thigh Adjustment: 9–18 in

Functional Summary

• Power‑on verified
  

• Flexion & Extension fully functional
  

• Adjustable ROM, speed, and pause settings verified
  

• Start/Stop responsive
  

• OEM digital hand controller fully functional; bright LED displays
  

• Smooth, quiet continuous cycling
  

• Foot cradle, calf, thigh, and footplate adjustments verified

Cosmetic Condition

• Good pre‑owned condition
  

• Normal cosmetic wear (minor scratches/scuffs)
  

• Chrome frame straight and clean
  

• Powder‑coated base structurally sound
  

• Rails, hinges, pivots, and linkages operate properly
  

• Adjustment knobs present and functional
  

• OEM controller clean with bright displays
  

• AC adapter cable has one taped insulation tear (cosmetic only)

Included

• Furniss Phoenix 1850 Knee CPM Machine
  

• OEM Digital Hand Controller
  

• AC Power Adapter
  

• Power Cord
  

• Printed User Manual

Not Included

• Foot boot
  

• Calf pad
  

• Thigh pad
  

• Auxiliary securing straps
  

• Bed stabilizer rods
  

• Any accessories not shown

Buyer Advisory

This pre‑owned rehabilitation device was cleaned, inspected, and function‑tested. Disposable softgoods (foot boot, calf pad, thigh pad, straps) are not included and must be replaced prior to clinical use. Review listing photographs carefully for exact condition and included components.

Shipping

Professionally packaged with controller, adapter, power cord, and manual secured inside the carton. Shipment includes tracking and full insurance.

Stock ID: 40023 (P.O. 2026) (40C) - SHIPPING READY

Purchase Terms & Buyer Protections

Condition & Use Notice

Condition: Overall, cosmetic, and functional condition are described in the listing above; please review all images carefully.
Functionality: Sold as described in the listing, or untested if stated. Biomed evaluation is recommended where applicable.
Included: Only items shown in photographs or specifically stated in the listing are included.
Buyer Responsibility: Buyer is responsible for verifying compatibility, suitability, and obtaining inspection, calibration, maintenance, or service as appropriate prior to use.