Topcon Corporation Model LM...

Product details

 Power Requirement: 120 V AC Frequency: 50 / 60 Hz Power Consumption: 31 W                  

Short Description:

Topcon LM-P5 Digital Lensmeter designed for measuring the optical power of eyeglass lenses including sphere, cylinder, axis, and addition values. The device features a digital measurement display, manual lens positioning stage, prism target optical viewing system, and front control panel for measurement adjustments. The unit powers on properly and the digital display responds to control inputs.

Power Cord: Integrated / attached power cord
Measurement Parameters Displayed: Sphere, Cylinder, Axis, Add
Controls Present: Print, Add, Transpose, SPH/CYL selection buttons
Display Type: Digital LED measurement display

Condition Summary:

Housing and Exterior
The unit is in overall very good cosmetic condition. The beige housing is structurally intact with no dents or cracks observed. Minor cosmetic signs of use such as light scuffs, scratches, and handling marks may be present consistent with normal laboratory use.

Controls and Adjustment Components
The manual lens positioning stage, lens holder assembly, and adjustment knobs appear intact and move smoothly. The large focusing / measurement wheel and adjustment levers function mechanically as expected.

Optical Viewing Area
The viewing window and internal prism target area appear clear with no visible damage. Internal optics appear intact based on visual inspection during testing.

Front Panel and Display
The digital display is bright and clearly readable. All front panel buttons were tested and found responsive. Commands such as ADD, SPH/CYL selection, transpose, and print register correctly on the display and modify the measurement output.

Functionality / Testing Summary

Power and Initialization
The device powers on properly using the integrated power cord and initializes without issue.

Display and Interface Response
The digital readout for Sphere, Cylinder, Axis, and Add parameters illuminates clearly. All front control buttons respond appropriately and update the display.

Mechanical Operation
The lens positioning stage, measurement arm, and focusing mechanisms move normally and appear mechanically intact.

Testing Limitations
Testing was limited to power-on verification, display functionality, and control responsiveness. Full optical calibration verification using certified calibration lenses was not performed.

What Is Included:

• Topcon LM-P5 Digital Lensmeter with integrated power cord.

What Is Not Included

• User manual
• Printer paper
• Calibration lenses
• Any additional accessories or documentation

Buyer Advisory Note:
This item is a professional optical measurement device commonly used in optical laboratories and eyewear dispensing environments. Buyers should perform calibration and servicing as required before clinical or laboratory use.

Shipping Note:
The device will be securely packaged to protect the optical and mechanical components during transit.

*Items shown in photos are the items that will ship.  If it is not shown in the photos, it is not included*

Stock ID : 39609 (P.O 2022) (SC 16)

Comments:

Kindly enlarge the images and see them with zooming.

Concern or query: Ask a Question

1. 1.    Overall Condition:- As seen in images - Very Good
2. 2.    Physical Condition:  Please review images before bidding : Very Good
3. 3.    Working Condition: The device powers on properly using the integrated power cord and initializes without issue.....Will receive item as pictured………(offered AS IS)
4. 4.    “As a whole; the item has not been tested technically or professionally at our end- unable to test --- being sold STRICTLY AS IS! Biomed check is strongly recommended before clinical use!”
5. 5.    Completeness: (with everything seen in the pictures. Please look at all pictures and go through detail description before bidding.)