BC Biomedical SPO-2000 Puls...

Product details

Voltage:                  12 V DC, 500 mA (via adapter)

Short description:

BC Biomedical SPO-2000 is a pulse oximetry simulator designed to test and verify the performance of pulse oximeter systems. It provides selectable simulated pulse rates (30–180 BPM) and output waveforms compatible with most pulse oximeter sensors. Compact and portable, it’s ideal for biomedical equipment verification and service departments.

Power Adapter:

• Manufacturer: Wall Industries, Inc.
• Model No.: WMIEPU15-12JPC
• Input: 100–240 V AC, 47–63 Hz, 0.4 A
• Output: 12 V DC, 1.25 A
• Part No.: BC20-21112 (compatible with SPO-2000 & NIBP-1000 Series)

Calibration: Calibrated by Calyx Metrology Lab (label present and intact – “VOID IF BROKEN”).

Condition:

• Device powers ON successfully; Power and Active LEDs illuminate when the Active button is pressed.
• BPM indicator LEDs (30–180 BPM) respond properly during activation.
• Physical condition is very good — no dents, no cracks.
• May show minor surface scratches and scuffs consistent with light prior use.
• Rubber feet intact.
• Calibration seal intact and readable.
• Front control panel is clean and clearly labeled with controls for ON/OFF, SCROLL, and ACTIVE/STANDBY.
• Side power switch responds normally.
• No further performance testing was conducted beyond power-on verification.

Functionality Summary:

• Power Test: Passed – unit powers on and responds to controls.
• LED Indicators: All respond correctly when active.
• Pulse Rate Indicators: 30–180 BPM LEDs functional.
• Calibration: Verified calibrated by Calyx Metrology Lab.
• Operation: Active light confirms function when engaged; ready for bench simulation use.
• Note: Full calibration verification or output waveform validation was not performed.

What’s Included:

• BC Biomedical SPO-2000 Pulse Oximetry Simulator (Serial # 73001664 Rev C)
• Original 12 V DC Power Adapter (P/N BC20-21112)

• Soft padded carrying case with two distinct pouches:
  

  • One fitted compartment for the simulator and power adapter
    

  • One additional pouch for accessories such as finger simulators, manuals, or cables
    

  • Shoulder strap for easy portability
    

What’s Not Included:

• FingerSim simulators
• User manual or additional documentation
• Additional accessories or connection cables not shown

*Items shown in photos are the items that will ship.  If it is not shown in the photos, it is not included*

Stock ID : 38577 (P.O 2019) (OFHC2)

Comments:

Kindly enlarge the images and see them with zooming.

Concern or query: Ask a Question

1. 1.    Overall Condition:- As seen in images  - Very Good
2. 2.    Physical Condition:  Please review images before bidding : Very Good
3. 3.    Working Condition: Unit has been tested at our end for powers on, seems working to us....Will receive item as pictured ……………(offered AS IS)
4. 4.    “As a whole; the item has not been tested technically or professionally at our end- unable to test --- being sold STRICTLY AS IS! Biomed check is strongly recommended before clinical use!”
5. 5.    Completeness: (with everything seen in the pictures. Please look at all pictures and go through detail description before bidding.)