GE Critikon DINAMAP Pro 100...
GE Critikon DINAMAP Pro 100 Vital Signs Monitor ONLY (Ref 117260) ~ 38876
GE Critikon DINAMAP Pro 100 vital signs monitor supporting NIBP (systolic/diastolic/MAP) and pulse rate. Unit powers on, passes self‑test, measures BP/pulse accurately, and printer activates. Cosmetic wear noted: scratches, scuffs, chipped bezel corner, stress cracks, broken printer door latch, and worn LCD.
Product details
Manufacturer | GE Medical Systems |
Item: | GE Critikon DINAMAP Pro 100 Vital Signs Monitor Ref 117260 |
Model/Cat # | Pro 100 | Ref 117260 |
Serial No. | M2689102 |
Made In: | USA |
Date of Manufacture: | 2000 |
Voltage: 100–240V AC 50 VA
Short description:
Used GE Critikon DINAMAP Pro 100 NIBP vital signs monitor. Unit powers on, passes self-test, measures blood pressure and pulse accurately, printer activates, and display is functional. Cosmetic wear present. Printer door latch is broken. Date/time backup function does not retain settings due to internal battery being dead. Main installed 12V battery is also dead — replacement required if portable use is desired.
Power: Supports 12–30V | 35 VA AC Adapter Operation
Battery: Internal 12V Rechargeable Battery Installed (Battery is dead — replacement strongly recommended)
Connectivity: Rear Serial Communication Port Present
Parameters Supported: NIBP: Systolic / Diastolic / MAP , Pulse Rate (BPM)
Integrated Printer: Yes
IP Rating: IPX1
CE Mark: 0086
Condition:
- Cosmetic Condition: Used – Fair Condition
- Scratches, scuffs, and wear on housing
- Lower LCD display functional but scratched with visible graphic pixel wear
- Top display LED segments bright and clear
- Chipped upper front left bezel corner
- Stress cracks visible on upper surface bezel
- Two cracks observed on back housing
- Printer door latch/clip broken → door does not lock securely
- Rear serial communication port intact
- Rear stand mounting / clamp assembly present and functional
- Labels intact and readable
- Unit powers on normally
- Passes internal self-test
- Boots to configuration / operation screen
- NIBP tested with cuff and hose — readings obtained successfully
- Alarms configurable
- Control trim knob intact and responsive
- Top LED display bright
- Lower LCD operational but visually worn / scratched
Printer activates and feeds properly
Date / Time backup battery is dead → unit does not retain settings when powered off(No paper installed)
Printer door latch broken
- Installed 12V system battery is dead → replacement highly recommended
- Unit operates continuously when plugged into AC power
- GE Critikon Dinamap Pro 100 Monitor
- Installed (dead) 12V battery (for replacement)
- Hospital-grade AC power cord
- NIBP hose / cuff
- Rolling cart / stand
- Printer paper
- User manual
- Any additional accessories not shown
*Items shown in photos are the items that will ship. If it is not shown in the photos, it is not included*
Stock ID : 38876 (P.O 5008) (Loc R2C5 ??)
Comments:
Kindly enlarge the images and see them with zooming.
Concern or query: Ask a Question
Condition: USED, please refer to images for cosmetic condition.
1. Overall Condition: As seen in images - Good
2. Physical Condition: Please review images before bidding - Good
3. Working Condition: Has been tested at our end and the functionality has been shown in the image section....Will receive item as pictured…………(Offered AS IS)
4. “As a whole; the item has not been tested technically or professionally at our end- unable to test --- being sold STRICTLY AS IS! Biomed check is strongly recommended before clinical use!”
5. Completeness: (with everything seen in the pictures. Please look at all pictures and go through detail description before bidding.)