Natus Medical NV 2.X Flexib...
Natus Medical NV 2.X Flexible Mounting Arm Ref NT-0018-01 | Lot of 4 ~ 38216
Lot of (4) Natus NV 2.X Arm assemblies for NICVIEW 2 systems, sold as-is. Each includes GIOTTOS MH1004 ball joint (2 missing knobs), flexible gooseneck, transformer box with USB/RS-232 ports, and pole clamp
Product details
Manufacturer: Natus Medical Incorporated
Model / Series: NV 2.X Arm – NCVIEW 2
Reference Number: NT-0018-01
Part Number: NVARM
Associated Reference: GIOTTOS MH1004 Ball Joint
Country of Origin: Made in Taiwan
Power / Connectivity: USB and RS-232 Ports
Overall Length: 34 inches
Short description:
Lot of (4) Natus Medical NV 2.X Arm – NCVIEW 2 Mounting Assemblies with GIOTTOS MH1004 Ball Joints, transformer boxes, flexible gooseneck sections, and pole clamps. Units show significant cosmetic wear and insulation cracks. Two ball joints missing knobs. Untested and sold as-is.
Visual & Cosmetic Inspection:
Each unit was visually inspected for external condition and integrity of mechanical components.
- Flexible Gooseneck Insulation: All four units exhibit cracks and tears on the insulation.
- Ball Joint Movement: Smooth and secure across all units.
- Transformer Housing:Deformation noted on all four units.
- Pole Clamp Assembly: Intact and functional; locks securely onto a pole.
- Connectors (USB / RS-232): Clean and firmly seated with no visible damage.
- Cables: No frays or exposed wiring observed.
- Surface Condition: Heavy cosmetic wear and surface scratches due to prior usage.
- Labels: Identification labels present and legible.
- Arm Articulation: Free range of motion with no restriction.
- Position Hold: Maintains set angles when tightened.
- Port Stability: USB/RS-232 ports remain securely attached.
- Clamp Tightness: Holds firmly without slipping.
- Wiring Continuity: Visual check performed; no broken leads visible.
- Cosmetic Condition: Fair to poor.
- Mechanical Condition: Fair to poor.
- Electrical Testing: Not Performed.
- Final Inspection Status: Untested – sold as-is.
- (1) GIOTTOS MH1004 Ball Joint Assembly (2 units are missing knob)
- (1) Flexible Gooseneck Section
- (1) Transformer Box W/ USB + RS-232 Ports
- (1) Post / Pole Clamp
- AC Adapter / Power Supply
- NICVIEW 2 Camera or Adapter Holster
- Mounting Stand / Base
- User Manual / Original Packaging
*Items shown in photos are the items that will ship. If it is not shown in the photos, it is not included*
Stock ID : 38216 (P.O ?) [R3 C10 (Corner)]
Comments:
Kindly enlarge the images and see them with zooming.
Concern or query: Ask a Question
Condition: USED, please refer to images for cosmetic condition.
1. Overall Condition:- As seen in images - Fair to poor
2. Physical Condition: Please review images before bidding - Fair to poor
3. Working Condition: Untested – physical movement only verified.....Will receive item as pictured ……………(offered AS IS)
4. “As a whole; the item has not been tested technically or professionally at our end- unable to test --- being sold STRICTLY AS IS! Biomed check is strongly recommended before clinical use!”
5. Completeness: (with everything seen in the pictures. Please look at all pictures and go through detail description before bidding.)