Philips IntelliVue MX700 + ...
Philips IntelliVue MX700 + X2 (M3002A) + M3012A Monitoring System W/ Leads ~ 38790
Product details
Manufacturer: | Philips Medizin Systeme |
Item: | Philips IntelliVue MX700 + X2 (M3002A) + M3012A Monitoring System W/ Leads |
Model/Cat # | MX700 / 865241 |
Serial No. | DE12524968 |
Made In: | Germany |
Date of Manufacture: | 2014-05 |
Voltage: 100–240 V AC, 50–60 Hz
Short Description:
Complete Philips IntelliVue bedside monitoring system including MX700 touchscreen monitor, X2 portable measurement module, and M3012A Hemodynamic Extension. Fully tested and offers ECG/Resp, SpO₂, NIBP, Temp, IBP, and Cardiac Output port capability. Includes new accessories and is ready for immediate clinical use.
Philips IntelliVue MX700 Bedside Monitor:
- Model / REF: 865241
- Serial Number: DE12524968
- DOM: 2014-05
- Made in Germany
- Power Requirements: 100–240V AC, 50–60 Hz
- Software Version: M.04.01 – 8
- Installed Options: H10, A06, C01, C06, C09, C13, C15, C19, C20, C21, C44, C45, C50, C51, M06, M20
Philips IntelliVue X2 Multi-Measurement Module:
- Model: M3002A
- REF: 865039
- Serial Number: DE95039654
- DOM: 2010-01
- Software Version: K.21.61
- Installed Options: C01, C12, C13, C15, C20
Battery Installed:
Model: M4607A | REF: 989803148701
10.8 V / 2000 mAh / 21.6 Wh
Holds charge; endurance not guaranteed
Philips M3012A Hemodynamic Extension:
- Model: M3012A Option C05
- Serial Number: D834717053
- DOM: 2007-08
- Parameters: 2× IBP, 2× Temperature, Cardiac Output port
- Cosmetics: Very faint side crack (minor), latch intact, connectors clean
SCREEN PROFILES & DISPLAY MODES
MX700 supports the full IntelliVue display suite, including:
- Dynamic Screen
- 4-Wave & 6-Wave Layouts
- Big Numerics
- Vent Screen
- 12-Lead ECG Screen
- Grouping Mode
- ST Map
- Custom Profile (Detar Medical)
- Overlapping Waveforms
These options confirm a fully enabled IntelliVue display platform with advanced workflow and multi-waveform capability.
MONITORING CAPABILITIES
X2 Base Measurements:
- ECG / Respiration
- SpO₂ (Nellcor-type direct connect)
- NIBP
- Temperature
- IBP
M3012A Expansion:
- Adds 2× IBP, 2× Temp, and C.O. port
- Supports arterial, CVP, UAP, PAP, and other invasive pressures (via transducers)
MX700 Platform Capabilities:
- ST analysis
- Graphical trends & numerical trends
- Adult / Pediatric / Neonatal profiles (depending on configuration)
- Customizable alarms, reports, and workflow tools
- Multi-waveform displays up to six simultaneous waveforms
PLATFORM COMPATIBILITY
This monitoring platform is compatible with:
- FMS-4 / FMS-8 Module Servers
- Sidestream & Mainstream CO₂ modules
- Cardiac Output / Thermodilution systems
- NMT (Neuromuscular Transmission)
- Additional specialized IntelliVue FMS modules
Modules listed above are not included, but the system fully supports them.
Condition Summary:
MX700
- Bright, clear, scratch-free LCD
- Highly responsive touchscreen
- Front bezel intact, no cracks
- Rear housing strong, no damage
- Blue cable cover intact
X2
- Minor LCD scratches; faint crack on upper-left bezel corner (cosmetic only)
- Buttons responsive and handle intact
M3012A
- Light wear; very small cosmetic crack
- Ports clean and secure
Overall Cosmetic Rating: Good Used Condition
Functionality Summary:
- All units power on normally and pass Philips self-tests
- MX700 recognizes X2 and M3012A immediately
- ECG, Resp, SpO₂, NIBP, Temp, IBP show expected baseline response
- Cardiac Output port active (transducer not included)
- X2 battery holds charge during operation
What Is Included:
New Accessories (Non-OEM unless specified)
- ST1305 Reusable Temperature Probe
- SG5124S ECG Trunk Cable + 5-Lead Set
- SP9325S Adult Direct-Connect SpO₂ Sensor (Nellcor type)
- SH0910S NIBP Hose
- SC2711-11 Adult Reusable NIBP Cuff
- SB0411 IBP Adapter Cable (Medex/Abbott style)
- Philips OEM Interface Cable (REF 453563474781)
- Hospital-grade power cord
What Is Not Included:
- FMS module server
- CO₂, NMT, or anesthetic agent modules
- IBP transducers
- Printer
- X2 docking/charging station
- Any accessories not explicitly listed
Comments:
Kindly enlarge the images and see them with zooming.
Concern or query: Ask a Question
Condition: USED, please refer to images for cosmetic condition.
1. Overall Condition: As seen in images - Very Good
2. Physical Condition: Please review images before bidding - Very Good
3. Working Condition: Has been tested at our end & is in good functionality as shown in the images.....Will receive item as pictured ……………(offered AS IS)
4. “As a whole; the item has not been tested technically or professionally at our end- unable to test --- being sold STRICTLY AS IS! Biomed check is strongly recommended before clinical use!”
5. Completeness: (with everything seen in the pictures. Please look at all pictures and go through detail description before bidding.)
