Medtronic BISx LOC 4-Ch Mod...
Medtronic BISx LOC 4-Ch Module 185-1016-AMS w/ Device & Patient IF Cables ~ 40553
Product details
Covidien BISx LOC 4-Channel Module REF 185-1016-AMS w/ Device & Patient Interface Cables
Item Overview
Pre-owned Covidien BISx LOC 4-Channel Module complete with integrated device interface cable and patient interface cable. The module was connected to a compatible Covidien BIS VISTA monitor, where it was immediately recognized, initialized successfully, and communicated properly with the monitor. During testing, the monitor displayed "Connect Sensor or Cable [14]", indicating the module completed initialization and was awaiting connection of a compatible BIS patient sensor.
Testing monitor is shown for demonstration purposes only and is not included.
Device Information
BISx LOC 4-Channel Module
Manufacturer: Covidien
Device: BISx LOC 4-Channel Module
REF: 185-1016-AMS | Serial #: B413597 | DOM: 2013
Made In: Singapore | CE: 0123
Software: SW 1.15 • FPGA 1.08 • SIC 4.00 • Hardware Rev. 4.00 • Protocol 1.07
Condition Summary
BISx LOC Module
- Good overall cosmetic condition
- Housing free of major cracks or dents
- Rear mounting/pole clamp present and intact
- Connector pins straight and undamaged
- Connector ports clean and intact
- Refurbished label present on housing
- Normal cosmetic wear consistent with previous use
Integrated Device Interface Cable
P/N: 10115253
- Approximately 12 ft. long
- Factory integrated cable
- No cuts, tears, or exposed wiring observed
- Strain reliefs intact
- Connector housing in good condition
- Connector pins straight and undamaged
Patient Interface Cable
REF: PIC-4GR106686
- Approximately 4 ft. long
- Good cosmetic condition
- No visible cable damage
- Connectors clean and intact
Functionality Summary
- Tested with a compatible Covidien BIS VISTA monitor
- Module recognized immediately during startup
- Initialized successfully
- Monitor-to-module communication verified
- System displayed "Connect Sensor or Cable [14]", indicating the module was awaiting a compatible BIS patient sensor
- No further functional testing performed
Accessories Included
- Covidien BISx LOC 4-Channel Module (REF 185-1016-AMS)
- Integrated Device Interface Cable (P/N 10115253)
- Patient Interface Cable (REF PIC-4GR106686)
Not Included
- Covidien BIS VISTA Monitor (used only for testing)
- BIS Patient Sensor
- Disposable Electrodes
- User Manual
- Power Supply
- Additional Cables or Accessories
Buyer Advisory
- Pre-owned equipment tested only for the functionality described above.
- A compatible Covidien BIS VISTA monitor and BIS patient sensor are required for operation and are not included.
- Please review all photographs carefully and verify compatibility before purchase.
- Any calibration, preventive maintenance, or certification required by your facility is the buyer's responsibility.
Shipping
- Module will be professionally packaged using protective cushioning to minimize the risk of shipping damage.
- Only the items shown in the listing photographs are included.
- Testing monitor shown in the photographs is not included.
Stock ID: 40553 (P.O. 2026) (OFH C7)
