2022 Stryker PneumoClear Pl...
2022 Stryker PneumoClear Plus FM300 CO₂ Conditioning Insufflator PM 2025 ~39395
Item specifics
Product details
Device Profile
Manufacturer: W.O.M. WORLD OF MEDICINE GmbH
Distributed By: Stryker Endoscopy
Device: PneumoClear Plus CO₂ Conditioning Insufflator
Type / Model: FM300
REF: 2211CE0785/0620-050-000
Serial Number: 2211CE0785
Software Version: 1.2.0
Date of Manufacture: 2022-11-16
Made In: Germany
CE Marked: Yes — CE 0197
Electrical Requirements: AC 100–240V~, 50/60 Hz
Power Consumption: AC 100V~ 1.05A / AC 240V~ 0.50A
Ingress Protection Rating: IP40
Maximum CO₂ Input Pressure: p(max) = 80 bar (1160 psi)
Maximum Output Pressure: 75 mmHg
Maximum Gas Flow Rate: 50 L/min
Short Description
Stryker PneumoClear Plus FM300 CO₂ Conditioning Insufflator designed for advanced laparoscopic and surgical insufflation applications. The system powers on, passes startup diagnostics, and was tested extensively in DEMO mode. The touchscreen interface is bright, responsive, and highly touch-sensitive. Device includes multiple procedure presets and configurable gas management settings.
Quick Condition Overview
Functional Status: Powers On & Passes Self-Test
Cosmetic Condition: Excellent Overall Condition
Working Status: Demo Mode Tested & Responsive
Completeness: Device + Power Cord + CO₂ Hose
Condition Summary
Cosmetics: Overall excellent cosmetic condition with minor signs of previous use consistent with normal medical environment handling. Housing is clean with no major dents, cracks, or structural damage observed.
Screen Condition: LCD touchscreen display is bright, sharp, and highly responsive. No major scratches, dead spots, or display damage observed during testing.
Ports & Connectors: Rear CO₂ inlet connector, front tubing interfaces, service ports, and power connection points appear clean and intact. Tube connection boards and interface receptacles appear in very good condition.
Labels & Identification: Factory labels, compliance markings, REF/SN labels, calibration tags, and TÜV certification markings remain present and legible.
Functionality / Testing Summary
Startup Testing: Device powers on properly and completes startup/self-test sequence successfully.
Gas Supply Notification: Unit displays “Check Gas Supply!” during startup because no active CO₂ source was connected during evaluation. This appears normal under current test conditions.
Demo Mode Testing: Device was tested extensively in DEMO mode. Touchscreen navigation, menu controls, and software settings responded properly during evaluation.
Procedure Modes Observed:
- High Flow / Bariatric
- Standard
- Pediatric
- Vessel Harvest
- TAMIS
- Advanced Flow
Configurable Features Observed:
- Adjustable starting pressure settings
- Adjustable gas flow rate settings
- Venting valve controls
- Evacuation level controls
- Bottle / house gas source selection
- Display & audio settings
- Multi-language support
- Tube set management menus
- Software configuration menus
Software Version: 1.2.0
Preventive Maintenance Status: PM inspection label indicates service/calibration completed in May 2025 with next scheduled PM due approximately May 2027.
Overall Functional Impression: Based on available testing, the device appears operational and responsive. Full verification with active CO₂ supply and clinical accessories was not performed at our facility.
What Is Included
- Stryker PneumoClear Plus FM300 CO₂ Conditioning Insufflator
- Power Cord
- CO₂ Hose Adapter
What Is Not Included
- CO₂ Gas Tank / Bottle
- CO2 Hose
- Tube Sets
- Additional Surgical Accessories
- User Manual
- Original Packaging
- Any items not shown in images
Buyer Advisory Note
This device was tested in startup and DEMO modes only. No live surgical or clinical testing was performed with active CO₂ supply connected. Buyer is responsible for confirming compatibility, calibration requirements, preventive maintenance status, and suitability for intended medical application prior to use.
Shipping Note
Stock ID: 39395 (P.O. 2025) (WH104 SCC16)